Search Our Site
Featured Products:
New EMC Probes for MIL-STD-461 and RTCA/DO-160 Testing
Pearson Electronics is pleased to introduce a new Injection Probe, Current Probe and Test Fixture specifically designed for meeting MIL-STD-461 and RTCA/DO-160 requirements. This new compact design includes a 2.0 inch Probe aperture for easier use and requires only one Test Fixture to accommodate both Probes.
> More Information
Model 7655
New line of Wide-Band Clamp-on Current Monitors features a 4 inch or 6 inch aperture in a demountable configuration for easy use on large conductors. The Pearson’s wide-band current monitors frequency response and 1% accuracy is featured in all of the models. The model 7655 has a sensitivity of 0.1 V/A, a 3dB bandwidth from 10 Hz to 4 MHz, and a 175 Ampere rms current rating.
> More Information
MIL-STD-461G CS101 Testing Simplified
Pearson Electronics Powerline Ripple Detector greatly simplifies the measurement of injected audio-frequency ripple on an ac power bus in EMI tests such as MIL-STD-461G CS101. The model PRD-120 accurately measures low-level audio ripple voltage on a 115 Vac power bus. The model PRD-240 is designed for voltages above 120 Vac and up to up to 240 Vac; 270Vdc. Both are used with a spectrum analyzer.
> More Information
Ultra Thin Current Transformer
New ultra-thin wide-band current transformers released by Pearson Electronics offer thicknesses that around around 1/2 the size of standard / in stock current transformers designed by Pearson. These new ultra thin broadband current transformers allow a more compact installation resulting in lower circuit inductance. Apertures range in size from 0.25 inches to 2.0 inches.
> More Information
Fast Clamp-On Current Transformers
Pearson Electronics is pleased to introduce two new Wide-Band Hinged Clamp-on Current Monitors with fast rise times. The models 8585C and 8590C feature a 2.0 and 2.5 nanosecond rise times, a ½ inch and 1 inch aperture, and are hinged for easy operation. The new design incorporates Pearson’s wide band frequency response in a demountable configuration for use on fixed conductors. Both models have a 1.0 V/A sensitivity, a 3dB bandwidth from approximately 1.0 KHz to 200 MHz.
> More Information
Coaxial Current Monitor
Pearson Electronics introduces a new wide band current monitor that allows you to easily measure current within a coaxial cable system. The current monitor can be inserted within a coaxial cable run by means of two BNC connectors. The Model 6027 has a 3dB bandwidth from 300 Hz to 200 MHz and an rms current rating of 2.5 Amperes.
> More Information
Industries / Applications
Particle Accelerator
The Particle Accelerator community uses Pearson Current Monitors for a variety of applications in the area of high . . .
EMI Industry
Pearson Clamp-on Current Probes are used to make accurate AC current measurements to meet many of the EMI standards. . .
Surge Current Testing
Wide Band Current Probes measure surge and in-rush currents for EMC and other industries. A typical requirement. . .
Medical Applications
The medical equipment industry uses Pearson Current Transformers in several applications. These include medical. . .
Plasma Research
Pearson Current Probes are used by the Semiconductor and Semiconductor Equipment Industry to make measurements at. . .
Lightning Discharge
Broad Band Current Transformers | Monitors are used to characterize lightning strikes at the Kennedy Space Center and leading. . .
Power Industry
The Power Industry uses Pearson Current Transformers to measure transients in switching gear and the observation of. . .
Capacitive Discharge
Pearson Current Monitors are used to view faithful waveforms and make accurate current measurements from a capacitive. . .
Beam Instrumentation
Custom Wide Band Current Monitors are use beam tube applications with our large aperture clamp-on Current Monitors. . .